Вопросы и ответы
Frequently Asked Questions 1
Author
DCSENG
Date
2017-12-18 10:45
Views
1921
1. What size is possible for cutting the pipe?
S-150 : Pipe O.D 16mm ~ 170mm
S-500 : Pipe O.D 16mm ~ 510mm
S-300HV : Pipe O.D 60mm ~ 320mm
S-600HV : Pipe O.D 250mm ~ 620mm
2. Is it possible to cut pipe (tube) under O.D 16mm?
When applying S-150 model tube collet, It is also available of 1/4 "(OD 6.35mm), 3/8" OD 9.25mm, 1/2 "OD 12.5mm, 6A OD 10.5mm and 8A OD 13.8mm ).
However, it can be used when using the blade (S-10080) only.
3. Is it impossible to cut pipes more than recommended size with S-500?
The recommended cutting size of the S-500 is 500A (O.D 510mm).
For more specifications, please contact our sales department.
043)256-0945
4. How much thicknesses are possible for pipe beveling?
S-150 : It is recommended 10mm, and possible up to 12mm
S-500 : It is recommended 8mm, and possible up to 10mm
S-300HV : It is possible up to 80mm.
S-600HV : It is possible up to 100mm.
S-CM4-M : It is possible up to 14C(when dividing beveling)
5. What are the available pipe materials?
Efficient equipment that can be used for cutting and beveling of sanitary pipes, stainless pipes, chromium-molybdenum tubes, titanium pipes, super duplex pipes, INCONEL, alloy and copper tubes, aluminum pipes, PP pipes, PE pipes, and PVDF pipes as well as uhp tubes used for super clean pipes and carbon steel.
6. Is it a device that runs automatically?
S-150 and S-500 are automatic (semi-automatic) in the rotation part of the machine.
S-300HV and S-600HV is Full Auto machine.
7. What is the pipe beveling angle?
Standard angle(S-150, S-500) is 30, 32, 35, 37.5, 45 degree, and It is available for order-made.
S-CM4_M is possible up to 0’ ~ 90’(It is possible for film removal).
S-300HV and S-600HV are possible not only inside and outside diameters of the cut surface but also shape machining.
8. What is the cutting quantity?
Please refer to the Data Sheet of archive.
9. What is the beveling quantity?
Please refer to the Data Sheet of archive.
10. How much does this equipment weigh?
S-150: Main body is 100Kg, and full set is 300Kg
S-500: Main body is 92Kg, and full set is 420Kg
11. What is the size of the equipment?
S-150: 900 * 2300 * 1260 (H) (including equipment table)
S-500: 3400 * 465 * 690 (H) (in case of 2 split with equipment rails)
You can move to 1 ton porter. Other specifications are available on request.
S-150 : Pipe O.D 16mm ~ 170mm
S-500 : Pipe O.D 16mm ~ 510mm
S-300HV : Pipe O.D 60mm ~ 320mm
S-600HV : Pipe O.D 250mm ~ 620mm
2. Is it possible to cut pipe (tube) under O.D 16mm?
When applying S-150 model tube collet, It is also available of 1/4 "(OD 6.35mm), 3/8" OD 9.25mm, 1/2 "OD 12.5mm, 6A OD 10.5mm and 8A OD 13.8mm ).
However, it can be used when using the blade (S-10080) only.
3. Is it impossible to cut pipes more than recommended size with S-500?
The recommended cutting size of the S-500 is 500A (O.D 510mm).
For more specifications, please contact our sales department.
043)256-0945
4. How much thicknesses are possible for pipe beveling?
S-150 : It is recommended 10mm, and possible up to 12mm
S-500 : It is recommended 8mm, and possible up to 10mm
S-300HV : It is possible up to 80mm.
S-600HV : It is possible up to 100mm.
S-CM4-M : It is possible up to 14C(when dividing beveling)
5. What are the available pipe materials?
Efficient equipment that can be used for cutting and beveling of sanitary pipes, stainless pipes, chromium-molybdenum tubes, titanium pipes, super duplex pipes, INCONEL, alloy and copper tubes, aluminum pipes, PP pipes, PE pipes, and PVDF pipes as well as uhp tubes used for super clean pipes and carbon steel.
6. Is it a device that runs automatically?
S-150 and S-500 are automatic (semi-automatic) in the rotation part of the machine.
S-300HV and S-600HV is Full Auto machine.
7. What is the pipe beveling angle?
Standard angle(S-150, S-500) is 30, 32, 35, 37.5, 45 degree, and It is available for order-made.
S-CM4_M is possible up to 0’ ~ 90’(It is possible for film removal).
S-300HV and S-600HV are possible not only inside and outside diameters of the cut surface but also shape machining.
8. What is the cutting quantity?
Please refer to the Data Sheet of archive.
9. What is the beveling quantity?
Please refer to the Data Sheet of archive.
10. How much does this equipment weigh?
S-150: Main body is 100Kg, and full set is 300Kg
S-500: Main body is 92Kg, and full set is 420Kg
11. What is the size of the equipment?
S-150: 900 * 2300 * 1260 (H) (including equipment table)
S-500: 3400 * 465 * 690 (H) (in case of 2 split with equipment rails)
You can move to 1 ton porter. Other specifications are available on request.