Product Introduction
01 Machine Specification
| Item | Unit | Specification | |
| Cutting Capacity | Min. O.D | mm (inch) | 16 (3/8) |
| Max. O.D | mm (inch) | 510 (20) | |
| Min Thickness | mm | 0.8 | |
| Max Thickness(Recommended) | mm | 10(8) | |
| Bevelling Capacity | Min Thickness | mm | 16 |
| Max. O.D | mm (inch) | 510 (20) | |
| Min Thickness | mm | – | |
| Min Thickness(Recommended) | mm | 10(8) | |
| Bevelling Angle | ° | 30°/32°/ 35°/37.5°/45° | |
| Mechanical Data | Size(DxLxH) | mm | 13x460x325 |
| Weight | kg | 92 | |
· Note) Minimum cutting thickness is on the basis of 16mm.
02 Motor Specifications
| Item | Unit | Cutting Motor | Rotation Motor |
| Rated Output | W | 1500 | 400 |
| Rated Voltage | V | AC 220 | AC 220 |
| Rated Current | A | 5.7 | 1.58 |
| Operating Environment | – | 0~40℃ / 20~80%RH | |
03 Standard Accessories
· S-500_PS: Pipe Support System
· S-500_PR: Total Rail
· S-500_PL: Pipe Lift
· S-500_CC: Large diameter pipe support(2 – 20inch)
· All-in-one toolbox – Standard Accessory
04 Optional Accessories
· S-500_VC: Small diameter pipe support(3/8 – 2inch)
Optional accessories for S-500
S-500_PR
Necessary for the tow work on large diameter pipe and heavy materials.
Why don’t you adjust the cutting spot easily with the pipe lift and fine-tuning handle.
· Pipe Lift : This is a device can easily lift up and down the heavy materials.
· Front and back movement device : This is a device easy to move heavy pipes and finely tune the cutting spot.
– Dimensions: 5000x465x350H Two-Piece Division 1600,3400
– Weight: about 180kg
– Supporting Ability: 6M(10A ~ 500A)
– Max. Weight Wheel : 400kg, Levelling foot 1000kg
– Assembled with 3 sets of S-500_PS for usage
– Necessary for the tow work of large diameter pipe and heavy materials.
– Pipe Lift included.
– Possible to finely tune the cutting spot with the backward and forward feeder.
– With a built-in toolbox(800x390x160Hx2EA)
– Easy to assemble with an adjusting pin type
S-500_PS
Used to support long pipes at the front and the back.
– Dimensions: 280 x 450 x 320H
– Weight: 33kg
– Supporting Ability: 10A ~ 500A
– Rated Load: 600kg
– Suitable for rotation movement.
– Usable as a turntable while welding.
– Used in three sets
– Easy to move back and forth while assembling angle wheels for rails.
Used at a variety of sites.
01. Small diameter pipe or small-scale sites: S-500 and two sets of S-500_PS can be used together.
Assembled with S-500 and two sets of S-500_PS for usage.
Best in mobility (able to be loaded on a RV vehicle)
· Sites where a large number of small diameter pipes and moving equipment is required
· Small sites where work distance has not been considered.
02. Large diameter or shop manufacturing sites
S-500 and three sets of S-500_PS can be used together with rails.
Available for mass production on best cutting conditions.
· Easy to move heavy pipes for work.
· Suitable for works with large diameter pipes and heavy materials.
· Sites where spool manufacturing is conducted at a designated place like Work Shop, Clean Room.
· Sites where work distance has been considered in full.
· Usable for existing equipment.
No more difficult work!!
Easy to move heavy pipes,
and finely tune the cutting spot.
