Product Introduction
01 Machine Specifications
| Item | Unit | Specification | ||
|---|---|---|---|---|
 |
Cutting &Beveling Capacity | Min. / Max. O.D | ㎜(inch) | 13(1/4) / 120(4) |
| Min. / Max. Thickness | ㎜ | 0.2 / 8.2(5) | ||
| Beveling Angle | ˚ | 30/32/35/37.5/45 | ||
| Mechanical Data | Size(D×L×H) | ㎜ | 143×366×383 | |
| Weight | kg | 47 | ||
 |
Cutting &Beveling Capacity | Min. / Max. O.D | ㎜(inch) | 20(1/2) / 170(6) |
| Min. / Max. Thickness | ㎜ | 0.2 / 8.2(5) | ||
| Beveling Angle | ˚ | 30/32/35/37.5/45 | ||
| Mechanical Data | Size(D×L×H) | ㎜ | 145×466×483 | |
| Weight | kg | 66 | ||
 |
Cutting &Beveling Capacity | Min. / Max. O.D | ㎜(inch) | 60(2) / 220(8) |
| Min. / Max. Thickness | ㎜ | 0.2 / 8.2(5) | ||
| Beveling Angle | ˚ | 30/32/35/37.5/45 | ||
| Mechanical Data | Size(D×L×H) | ㎜ | 145×525×542 | |
| Weight | kg | 77 | ||
· Minimum cutting thickness is on the basis of 3/8 inch
02 Motor Specifications
| Item | Unit | Cutting Motor |
|---|---|---|
| Rated output | W | 1000 |
| Rated Voltage | V | AC 200-220V / 50-60Hz |
| Rated Current | A | 4.5 |
| Operating Environment | – | -20℃-40℃/20-80%RH |
03 Standard Accessory | Standard Accessory
· Standard Accessory
04 Optional Accessories | Optional Accessories
· S-LT Series_MT: Machine Table
· S-LT Series_RS: Pipe Transfer Device
· S-LT Series_VS: Pipe Support
· S-150LT_SJ: Sub Vise for S-150LT(13 – 20mm)
· S-200LT_SJ: Sub Vise for S-200LT(13 – 60mm)
· S-LT Series_Collet: Collet(1/4, 3/8, 1/2inch)
Optional accessory for S-LT Series
S-LT Series_MT
Equipment table.
All products are supplied as prefabricated and can be used as soon as delivered.
– Comes with S-LT Series_RS and built with 1 sets of S-LT Series_VS.
– Designed so that 4M straight tubes are used.
– Compatible with S-LT Series_VS.
– Built with a small toolbox
– Size : 900x2300x750H(900x3600x750H)
– Material : SS400 powder painting(uper plate STS304)
S-LT Series_RS
This equipment is essential for heavy pipe work.
Easily find where to cut on the pipe.
– Pipeline feeder for tables
– Fine tune cutting spots with backward and forward feeder.
– Compatible with S-LT Series_VS.
– Usable for existing equipment.
S-LT Series_VS
Upper V-shape head only supplied.
– Standing pipeline feeder
– Suitable for front and back movement and rotation movement.
– Compatible with S-LT Series_RS.
– Fit to your existing stand.
– Usable for existing equipment.
Used at a variety of sites.
Mass produceable under the best cutting conditions.
· Feed heavy object via pipes for working.
· Fine tune cutting spots.
· Sites of spool work at designated places like workshops and clean rooms.
· Sites where work distance has been considered in full.
· Usable for existing equipment.
No more difficult work!!
Easy to move heavy pipes ,
and fine-tune the cutting spot.
